Step 1

Place a mark in the middle of your closet at 76 inches from the floor.

Step 2

Draw a level line at your mark from one side of the closet to the other.

Step 3

Mark all of the studs on your level line.

Step 4

Screw your two inch track screws through the holes in the rail into the studs. (May need to angle the screws in the corner to hit studs)

Step 5

Snap on the cover that was cut to fit over your rail.

Step 6

Screw on your closet supports in the predrilled holes using the Euro screws provided.

Step 7

Put in your through cam bolts in the designated holes.

Step 8

Put in your one sided cam bolts in the designated holes.

Step 9

Tap in your cam locks into the shelves making sure the slot faces out to receive the cam bolts.

Step 10

Put in the rod ends by simply pressing them into the designated holes.

Step 11

Now you are ready to begin hanging your partitions. Start with the number one partition in the left most wall of your closet.

Step 12

Use shelf A to mark where the next partition will go.

Step 13

Hang Partition number 2 at the mark you just made.

Step 14

Start setting and locking your cam shelves by giving the cam locks about a half a turn counterclockwise.

Step 15

First the top, then work your way to the bottom, making sure that the shelves are secure each time.

Step 16

Now use cam shelf B to measure and repeat the same process as before until you have completed your install.

Step 17

Partition 3

Step 18

Cam Shelves B

Step 19

Partition 4...You get the idea.

http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/996594image811.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/550274installation_guide_step_2.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/282455installation_guide_step_3.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/347714installation_guide_step_4.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/103378installation_guide_step_5.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/479934installation_guide_step_6.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/148751installation_guide_step_7.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/990936installation_guide_step_8.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/670712installation_guide_step_9.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/178332installation_guide_step_10.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/765112installation_guide_step_11.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/702957installation_guide_step_12.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/645306installation_guide_step_13.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/390670installation_guide_step_14.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/636242installation_guide_step_15.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/170889installation_guide_step_16.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/783184installation_guide_step_17.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/740585installation_guide_step_18.jpg
http://www.closethero.biz/components/com_gk2_photoslide/images/thumbm/470678installation_guide_step_19.jpg
News Image

Step 1

Place a mark in the middle of your closet at 76 inches from the floor.

News Image

Step 2

Draw a level line at your mark from one side of the closet to the other.

News Image

Step 3

Mark all of the studs on your level line.

News Image

Step 4

Screw your two inch track screws through the holes in the rail into the studs. (May need to angle the screws in the corner to hit studs)

News Image

Step 5

Snap on the cover that was cut to fit over your rail.

News Image

Step 6

Screw on your closet supports in the predrilled holes using the Euro screws provided.

News Image

Step 7

Put in your through cam bolts in the designated holes.

News Image

Step 8

Put in your one sided cam bolts in the designated holes.

News Image

Step 9

Tap in your cam locks into the shelves making sure the slot faces out to receive the cam bolts.

News Image

Step 10

Put in the rod ends by simply pressing them into the designated holes.

News Image

Step 11

Now you are ready to begin hanging your partitions. Start with the number one partition in the left most wall of your closet.

News Image

Step 12

Use shelf A to mark where the next partition will go.

News Image

Step 13

Hang Partition number 2 at the mark you just made.

News Image

Step 14

Start setting and locking your cam shelves by giving the cam locks about a half a turn counterclockwise.

News Image

Step 15

First the top, then work your way to the bottom, making sure that the shelves are secure each time.

News Image

Step 16

Now use cam shelf B to measure and repeat the same process as before until you have completed your install.

News Image

Step 17

Partition 3

News Image

Step 18

Cam Shelves B

News Image

Step 19

Partition 4...You get the idea.